Slide the flagpole
into the ground sleeve, making sure that no dirt
enters the ground sleeve.
STEP
2
Attach the flag
to the rotating collars and raise the pole section.
REMEMBER:
Your AEP telescoping flagpole can be removed when
severe weather is pending.
OPERATING
INSTRUCTIONS
STEP
1
To raise the flagpole;
first raise the smallest section to its full extent
allowing it to self index; slightly rotate counter
clockwise; then lower to engage locking tabs. It
is not necessary to exert force to lock each section
in place. Repeat with remaining sections.
STEP
2
To lower the pole;
reverse the procedure in Step 1. Each section of
the pole should be lowered slowly, not allowing
sections to drop freely.
NOTE:
Your AEP flagpole can be lowered or removed
for storage in the event of extreme weather conditions,
i.e. before a tornado or hurricane.
MAINTENANCE
INSTRUCTIONS
The AEP series of
flagpoles is virtually maintenance free. In order
to clean the pole simply wipe the pole down with
soap and water and then rinse clean.
For technical assistance call American Engineered
Products:
1-888-237-6744
